[June 11, 2015]

It's Getting Hot in Here!

In an effort to help optical module suppliers and system designers reduce heat and thermal management issues, the Optical Internetworking Forum (OIF (News - Alert)) has approved a thermal interface implementation agreement (IA) for pluggable optics modules. The agreement summarizes the information to be provided by module suppliers to facilitate thermal integration of the module within the host system. It also defines the requirements and methods for testing a thermal interface between a pluggable optical module and the host-system heatsink.

"When optical modules are mated with heatsinks, the goal is to remove over 90% of the heat through the interface area into the airflow stream via the heatsink," said Torsten Wuth, of Coriant (News - Alert) and the OIF Physical Layer User Group Working Group chair. "Nominal ranges of heat flux are defined as Power Density classes. The OIF agreement defines acceptable thermal impedances for the contact area for various pluggable module types and a method of measuring the impedance."

The OIF previously addressed various methods that could be employed by system designers to reduce the temperatures of modules in air-cooled systems in the Thermal Management at the Faceplate white paper. Those methods included the direction of airflow over the modules, internal system baffling to direct airflow, placement of the modules and other heat dssipating devices on the blade, optimizing fin layout on the heatsink, and increasing the thermal conductivity of the heatsink, as well as the importance of thermal contact resistance between the module and the heatsink.

The new IA specifies generic interface properties but includes specific examples such as, CFP, CFP2, CFP4, XFP, SFP, SFP+, QSFP, QSFP+, and CDFP. Of primary concern are interfaces where the pluggable module slides through the faceplate and under a spring-loaded heat sink. This type of interface has limited contact force because the insertion and extraction force and force from the heatsink on the connectors are limited.

For more information go to http://www.oiforum.com/documents/implementation-agreements/.

About the OIF

The OIF facilitates the development and deployment of interoperable networking solutions and services. Members collaborate to drive Implementation Agreements (IAs) and interoperability demonstrations to accelerate and maximize market adoption of advanced internetworking technologies. OIF work applies to optical and electrical interconnects, optical component and network processing technologies, and to network control and operations including software defined networks and network function virtualization. The OIF actively supports and extends the work of national and international standards bodies. Launched in 1998, the OIF is the only industry group uniting representatives from across the spectrum of networking, including many of the world's leading service providers, system vendors, component manufacturers, software and testing vendors. Information on the OIF can be found at http://www.oiforum.com.

View source version on businesswire.com: http://www.businesswire.com/news/home/20150611005268/en/

[ Back To Transforming Network Infrastructure's Homepage ]